This Mila Lockcase with a Latch Only has a 35mm backset, 92mm centres and an 8mm single spindle. The 4500 series features different positioned connectors to the MILACASE35LATCH Latch (adjacent). ...
This Safeware gearbox has an 8mm double spindle with 62mm/92mm centres and a 35mm backset.
Operation: Double spindle
Latch reversal: Undo the screw or screws (depending on the mo...
This Winkhaus genuine gearbox - Split Spindle or Lever Lever. Winkhaus cases are held on to strips by pins. To remove the pins, tap them out with a punch (The centre pin must be accessed by undoing th...
This Fullex Crimebeater genuine gearbox is available in 35mm, 45mm or a 55mm backset and 92mm/62mm centres.
Operation: Double spindle
Latch reversal: Undo the screw or screws (depending&nb...
This Mila 4500 genuine slave gearbox has a single 8mm spindle with no latch and deadbolt
Also known as Coldseal and Swiftlocks
M4 x 10mm self-tapping machine screws need to be used with this ...
Fullex XL gearboxes are available in 35mm and 45mm backsets in single, double and split spindle configurations but their dimensions are all the same. They measure 227mm high by the backset + 15mm. The...
This Yale YS170 series genuine gearbox is only for the yale doormaster multipoint locks available in 35mm and 45mm backsets.
Operation: Lift lever split spindle
Latch reversal: Undo the screw or scr...
KFV cases are riveted onto strips and need to be drilled and then re-riveted. These cases will only replace newer KFV locks as older versions have different connectors.
Operation: Lift lever
L...
This Elite gearbox is also branded Roto and features a single spindle
Some variants will be stamped Inliten - 45mm is currently only available in a double spindle - Part Number ELITECASE45 however if...