This Winkhaus genuine gearbox - Split Spindle or Lever Lever. Winkhaus cases are held on to strips by pins. To remove the pins, tap them out with a punch (The centre pin must be accessed by undoing th...
This Safeware gearbox has an 8mm double spindle with 62mm/92mm centres and a 35mm backset.
Operation: Double spindle
Latch reversal: Undo the screw or screws (depending on the mo...
This Mila Lockcase with a Latch Only has a 35mm backset, 92mm centres and an 8mm single spindle. The 4500 series features different positioned connectors to the MILACASE35LATCH Latch (adjacent). ...
This Fullex SL16 is the new style genuine gearbox lockcase features an 8mm split spindle, 68mm centres and is available with 35mm, 45mm or 55mm backsets.
Operation: Split spindle nightlatch
Lat...
This is a genuine Maco, replacement gearbox for the GTS range of locks and also found fitted to Aubi locks. Although locks were made in both 28mm and 45mm backsets, only the 35mm version gearbox is st...
This Fullex genuine gearbox original old style version case a features a split spindle or lift lever function and is the last type available from the original old style Fullex multipoint locks. T...
This Mila/Coldseal/Swift Gearbox has a double 8mm spindle, 92mm centres, a 35mm backset. M4 x 10mm self tapping machine screws need to be used with this lock as screw holes are unthreaded.
Operation:...
This genuine Roto H600 genuine gearbox is available with a single spindle and a 35mm backset.
Operation: Lift lever
Latch reversal: Locate the small hole above the latch and insert a 2mm Allen ...
This Winkhaus genuine gearbox is the lift lever version features an 8mm single spindle and 92mm centres. Winkhaus cases are held on to strips by pins. To remove the pins, tap them out with a punc...
This ABT Gibbons genuine gearbox formed part of a 1 piece lock which is no longer available. It is also known as the Zenith Staybrite or St Helens glass door lock and was available with concealed shoo...
Fuhr genuine gearbox with a key wind function and a 35mm backset.
Operation: Key wind
Latch reversal: Undo the screw in the side of the lock case adjacent to the latch. Remove the latch, reverse, re...
This Winkhaus genuine gearbox cases are held onto the strips by pins. To remove the pins tap them out with a punch (the centre pin must be accessed by undoing the screw in the case) and reattach by re...
This ABT Gibbons genuine gearbox formed part of a 1 piece lock which is no longer available. It is also known as the Zenith Staybrite or St Helens glass door lock and was available with concealed shoo...
Winkhaus genuine gearbox are held onto the strips by pins. To remove the pins tap them out with a punch (the centre pin must be accessed by undoing the screw in the case) and reattach&n...
This genuine KFV genuine gearbox is riveted onto strips and need to be drilled and then re-riveted. These cases will only replace newer KFV locks as older versions have different connectors.
Ope...
This Technal gearbox section is often found on aluminium doors on commercial property. Specialist keeps are available by special order via the specials department.
Operation: Key wind.
Latch rever...
This genuine gearbox suit and Aluminium doors and would have originally been supplied with extension pieces either hooks or deadbolts. No strike plate supplied. Supplied without a faceplate (discontin...