This Lockmaster genuine gearbox features an 8mm double spindle with 62/92mm centres and a 35mm backset. Double spindle gearboxes are unsprung and therefore not suitable for use with unsprung hand...
This Maco gearbox mk5 has an 8mm split spindle, a 35mm backset and 92mm centres. Old style locks are not interchangeable with newer versions so please examine the photographs carefully....
This Maco gearbox mk3 has an 8mm single spindle, a 35mm backset and 92mm centres. Old style locks are not interchangeable with newer versions so please examine the photographs carefully...
This Maco lockcase has a 35mm backset, a single 8mm spindle and 92mm centres.
Operation: Lift lever
Latch reversal: Inward opening - Push in the square button on the side of the case, remove the lat...
This is a genuine Maco, replacement gearbox for the GTS range of locks and also found fitted to Aubi locks. Although locks were made in both 28mm and 45mm backsets, only the 35mm version gearbox is st...
This Mila Lockcase with a Latch Only has a 35mm backset, 92mm centres and an 8mm single spindle. The 4500 series features different positioned connectors to the MILACASE35LATCH Latch (adjacent). ...
This Mila 4500 genuine slave gearbox has a single 8mm spindle with no latch and deadbolt
Also known as Coldseal and Swiftlocks
M4 x 10mm self-tapping machine screws need to be used with this ...
This Mila/Coldseal/Swift Gearbox has a double 8mm spindle, 92mm centres, a 35mm backset. M4 x 10mm self tapping machine screws need to be used with this lock as screw holes are unthreaded.
Operation:...
This Mila gearbox has a latch only and available with 25mm, 28mm, 35mm and 45mm backsets and has 92mm centres and an 8mm single spindle.
Operation: Lift lever
Latch reversal: Undo the scre...
This gearbox suits old style Mila locks. It is not manufactured by Mila but is a suitable replacement. If a genuine part is required, order part number MILGBOX35.
This gearbox features a latch, deadb...
This genuine Roto H600 genuine gearbox is available with a single spindle and a 35mm backset.
Operation: Lift lever
Latch reversal: Locate the small hole above the latch and insert a 2mm Allen ...
This Safeware gearbox has an 8mm double spindle with 62mm/92mm centres and a 35mm backset.
Operation: Double spindle
Latch reversal: Undo the screw or screws (depending on the mo...
This Technal gearbox section is often found on aluminium doors on commercial property. Specialist keeps are available by special order via the specials department.
Operation: Key wind.
Latch rever...
The Everest lock was historically fitted to aluminium doors. The top and bottom deadbolts, connecting bars, split spindles and door handles for this lock are no longer manufactured. The faceplate...
This genuine gearbox suit and Aluminium doors and would have originally been supplied with extension pieces either hooks or deadbolts. No strike plate supplied. Supplied without a faceplate (discontin...
This Winkhaus genuine gearbox cases are held onto the strips by pins. To remove the pins tap them out with a punch (the centre pin must be accessed by undoing the screw in the case) and reattach by re...
This Winkhaus genuine gearbox is the lift lever version features an 8mm single spindle and 92mm centres. Winkhaus cases are held on to strips by pins. To remove the pins, tap them out with a punc...
This Winkhaus genuine gearbox - Split Spindle or Lever Lever. Winkhaus cases are held on to strips by pins. To remove the pins, tap them out with a punch (The centre pin must be accessed by undoing th...
Winkhaus genuine gearbox are held onto the strips by pins. To remove the pins tap them out with a punch (the centre pin must be accessed by undoing the screw in the case) and reattach&n...