This Yale YS170 series genuine gearbox is only for the yale doormaster multipoint locks available in 35mm and 45mm backsets.
Operation: Lift lever split spindle
Latch reversal: Undo the screw or scr...
This Yale G2000 series gearbox is designed to be used with Yale cylinders ONLY - Iseo and ERA cylinders do NOT work with this lock. These gearboxes feature a snib which is turned by a cam when th...
Yale G2000 Series gearboxes are designed to work with Yale cylinders only.
This gearbox features a small snib that is turned by the cam when the key is turned. Sometimes, manufacturing tolerances mea...
This Doormaster gearbox kit is a set of the most popular gearboxes, one overnight lock, one adjustable keep and one torx screwdriver supplied in a foam lined black plastic carry case for convenience. ...
This Winkhaus genuine gearbox - Split Spindle or Lever Lever. Winkhaus cases are held on to strips by pins. To remove the pins, tap them out with a punch (The centre pin must be accessed by undoing th...
This Winkhaus genuine gearbox is the lift lever version features an 8mm single spindle and 92mm centres. Winkhaus cases are held on to strips by pins. To remove the pins, tap them out with a punc...
This Winkhaus genuine gearbox cases are held onto the strips by pins. To remove the pins tap them out with a punch (the centre pin must be accessed by undoing the screw in the case) and reattach by re...
This genuine gearbox suit and Aluminium doors and would have originally been supplied with extension pieces either hooks or deadbolts. No strike plate supplied. Supplied without a faceplate (discontin...
The Everest lock was historically fitted to aluminium doors. The top and bottom deadbolts, connecting bars, split spindles and door handles for this lock are no longer manufactured. The faceplate...
This Technal gearbox section is often found on aluminium doors on commercial property. Specialist keeps are available by special order via the specials department.
Operation: Key wind.
Latch rever...
This Safeware gearbox has an 8mm double spindle with 62mm/92mm centres and a 35mm backset.
Operation: Double spindle
Latch reversal: Undo the screw or screws (depending on the mo...
This genuine Roto H600 genuine gearbox is available with a single spindle and a 35mm backset.
Operation: Lift lever
Latch reversal: Locate the small hole above the latch and insert a 2mm Allen ...
This Elite gearbox is also branded Roto and features a single spindle
Some variants will be stamped Inliten - 45mm is currently only available in a double spindle - Part Number ELITECASE45 however if...