This gearbox suits old style Mila locks. It is not manufactured by Mila but is a suitable replacement. If a genuine part is required, order part number MILGBOX35.
This gearbox features a latch, deadb...
This Mila gearbox has a latch only and available with 25mm, 28mm, 35mm and 45mm backsets and has 92mm centres and an 8mm single spindle.
Operation: Lift lever
Latch reversal: Undo the scre...
This Mila Lockcase with a Latch Only has a 35mm backset, 92mm centres and an 8mm single spindle. The 4500 series features different positioned connectors to the MILACASE35LATCH Latch (adjacent). ...
This Technal gearbox section is often found on aluminium doors on commercial property. Specialist keeps are available by special order via the specials department.
Operation: Key wind.
Latch rever...
This Safeware gearbox has an 8mm double spindle with 62mm/92mm centres and a 35mm backset.
Operation: Double spindle
Latch reversal: Undo the screw or screws (depending on the mo...
This ERA vectis deadbolt genuine gearbox features a split spindle, has 92mm centres and is available with either a 35mm or 45mm backset. Vectis cases are interchangeable with any ERA multipo...
This ERA vectis hookbolt genuine gearbox features a split spindle, has 92mm centres and is available with a 35mm backset. Vectis cases are interchangeable with any ERA multipoint lock and al...
This genuine ERA Vectis genuine gearbox is interchangeable with any ERA multipoint lock and allows for mortice locking on multipoint locks. Supplied with 2 keys and can be keyed alike in house.
Opera...
This Yale YS170 series genuine gearbox is only for the yale doormaster multipoint locks available in 35mm and 45mm backsets.
Operation: Lift lever split spindle
Latch reversal: Undo the screw or scr...
This Yale G2000 series gearbox is designed to be used with Yale cylinders ONLY - Iseo and ERA cylinders do NOT work with this lock. These gearboxes feature a snib which is turned by a cam when th...
This Winkhaus genuine gearbox - Split Spindle or Lever Lever. Winkhaus cases are held on to strips by pins. To remove the pins, tap them out with a punch (The centre pin must be accessed by undoing th...
This Winkhaus genuine gearbox cases are held onto the strips by pins. To remove the pins tap them out with a punch (the centre pin must be accessed by undoing the screw in the case) and reattach by re...
This Winkhaus genuine gearbox is the lift lever version features an 8mm single spindle and 92mm centres. Winkhaus cases are held on to strips by pins. To remove the pins, tap them out with a punc...
Winkhaus genuine gearbox are held onto the strips by pins. To remove the pins tap them out with a punch (the centre pin must be accessed by undoing the screw in the case) and reattach&n...
Ingenious Genuine Gearbox
Operation: Lift lever or Double spindle
Latch reversal: Undo the screw in the latch to remove. Reverse and reinsert then replace screws.