High quality Adams Rite mini shear Magnets, used in applications where the armature is required to pass over the face of the Magnet. Compatible with timber, steel, aluminium & glass frames, suita...
High quality Adams Rite Slimline style double Magnet, for direct pull applications. Compatible with timber, steel, aluminium & glass frames and it is suitable for Internal use.Measurements ...
High quality Adams Rite Standard style Single Magnet, for direct pull applications. Compatible with timber, steel, aluminium & glass frames Internal use. Current Consumption: 480mA @ 12V DC, 2...
The 7100 series suits any single action single leaf aluminium door fitted with a deadlatch lock.
Voltage: 12V DC
Jaw strength: 907kg
Supplied in Fail Safe mode but reversible to fail ...
Dorcas electric releases designed to suit rim locks. Available in either fail locked/secure or unlocked/safe and is suitable for low usage applications.
Measurements
Type: Rim.
Style: Eur...
The AL2000 is a high security electric release which features monitoring, selectable 12v or 24v (when wiring) and field reversible fail safe/fail secure operation. The additional RM1 rectifier allows ...
The DB25 offers a Slimline design and features power reduction allowing for continuous operation without heat generation. Also features automatic voltage regulation and dual monitoring.
Measurement
...
The EB250 is a Slimline lock ideally suited to narrow style aluminium doors. It suits sliding, double or Single swing doors and can be fitted to the door or the frame. Compatible with timber and metal...
The EB501 is a mini solenoid bolt that can be fitted to the door or frame and is often used for narrow profile cabinets and showcases.
Measurements
Field Reversible: Fail safe.
Dime...
High quality Alpro mini shear Magnets, used in applications where the armature is required to pass over the face of the Magnet. Compatible with timber, steel, aluminium & glass frames (depends on sele...
Tate Colson UPVC Electric Release. Available as either a left or right handed variant. Please refer to the picture for assistance with selection.Handed latch and deadbolt keep suitable for multipoint ...
The EB1001 suits all door types and can be fitted in the door or the frame. It also features a plug in LED indicator as standard.
Measurements
Field Reversible: Fail safe.
Dimension...
The EL900 is supplied with both long (200mm separate) and short faceplates (124mm fitted) and a 25mm extension lip and while available in both fail safe and fail secure. These releases can be easily c...
Trimec ES110 ANSI Electric Release - Long Faceplate.
This version of the ES110 features a long stainless steel faceplate in addition to the other features of the standard ES110 series releases.
Key ...
Cost effective kit with Rim and Mortice faceplate. This standard sized European style latch release is supplied with
both a rim mounting box for use with nightlatches, as well as a flat mortice face...
An external standard sized magnet for use with gates and external doors. Compatible with timber, steel, aluminium and glass frames.Specifications (HxWxD): 220mm x 60mm x 40mm. Current consumptio...
Cost effective floor mounted hold open Magnet, designed to release a door and allow it to close when triggered by the fire alarm system. Compatible with timber steel, & aluminium frames. ...
A cost effective wall mounted hold open Magnet, designed to release a door and allow it to close when triggered by the fire alarm system. Compatible with timber steel, & aluminium frames. Curr...
An economy surface mounted micro Magnet designed for lightweight applications. Compatible with timber, steel, aluminium and glass frames Internal use. Current Consumption: 380mA @ 12v, 190mA @...
Cost effective shear magnet, used in applications where the armature is required to pass over the face of the magnet. Comes complete with control box for easy installation and setup, suitable for Inte...
An economy Slimline Magnet available with or without monitoring ideally suited to lightweight doors and cupboards. Compatible with timber, steel, aluminium and glass frames, suitable for in...
The TSS Z & L bracket to suit SLIMMAG magnets allows for inward opening applications giving multiple options for fitting.Specifications. L-Bracket Dimensions: (H) 28mm x (L) 250mm (D) 47mm.&nb...
An economy double Slimline Magnet available with or without monitoring. Compatible with timber, steel, aluminium and glass frames.Specifications (HxWxD): 500mm x 46mm x 24mm. Current consum...