This is
The key wind . Operation version of the KFV 2 pin multipoint lock with 1490mm between the pins. Some models have been discontinued. Where available, alternatives are listed above although e...
This KFV comes with 2 pin deadbolts and a central latch and deadbolt. Look out for older versions of this lock which have a slightly different case design and no markings on the faceplate. Some models...
A 2 hook and 2 roller lock available with either a solid or split follower.
Please note that the AS4921SS35 will not accept a solid spindle and can only be used with a split spindle function.
Opera...
A 2 roller lock with serrations for attaching shootbolts at the top and bottom of the door.
Operation: Lift lever.
Latch reversal: Depending on date of manufacture either- Push in the latch and un...
A 2 shoot pin lock with serrations for attaching shootbolts at the top and bottom of the door.
Operation: Lift lever.
Latch reversal: Depending on date of manufacture either- Push in the latch and...
A 2 hook lock with serrations for attaching shootbolts at the top and bottom of the door.
The screw centres either side of the spindle are 37mm.
Operation: Lift lever.
Latch reversal: Depending ...
KFV cases are riveted onto strips and need to be drilled and then re-riveted. These cases will only replace newer KFV locks as older versions have different connectors.
Operation: Lift lever
L...
This genuine KFV genuine gearbox is riveted onto strips and need to be drilled and then re-riveted. These cases will only replace newer KFV locks as older versions have different connectors.
Ope...
This single spindle Euro profile full locking mechanism from KFV features a 16mm faceplate, a latch & deadbolt gearbox and 2 round bolt locking points.
The KFV 040740 is a mortice Sashlock with a deadbolt and reversible latchbolt, suitable for standard lever/lever or lever/pull pad handles with PZ 92. This product has a hammerlack finish, 16mm wide ...
KFV Hook Case Only
Suitable to Replace Top or Bottom Case
Fixed by 3 Rivets - Not Supplied
Rivet size required is 3.2 x 10.8mm
Please note these are reconditioned parts - all are cleaned and teste...
A KFV reverse action bottom shootbolt for use with multipoint locks with serrated drive rods.
The overall faceplate length is 180mm, the width is 16mm and the throw of the shootbolt is 22mm.
A shoot...
A KFV normal action top shootbolt for use with multipoint locks with serrated drive rods.
The overall faceplate length is 235mm, the width is 16mm and the throw of the shootbolt is 22mm.
A shootbolt...
This is the key wind operation version of the KFV 2 pin multipoint lock for stable doors.
Backset: 35mm
Centres: 92mm
Operation: Key wind.
Latch reversal: Depending on date of manufacture either:
...
This Mila Standard multipoint door lock features 2 Rollers, 2 Hooks, 1 Deadbolt, 1 Latch & 2 Anti Lift Bolts.Mila multipoint door locks were very widely specified on residential doors until the mid 20...
KFV cases are riveted onto strips and need to be drilled and then re-riveted. These cases will only replace newer KFV locks as older versions have different connectors.
KFV cases are riveted onto strips and need to be drilled and then re-riveted. These cases will only replace newer KFV locks as older versions have different connectors.
This KFV Key Wind multipoint door lock features 4 Rollers, 1 Deadbolt & 1 Latch.Identifying a KFV multipoint door lock is sometimes difficult. Early models did not feature a stamp on the faceplate but...