A mild steel lock plate to suit Gatemaster GLB and GLB02 gate locking bolts. Weld this to the gate and then fit the separately available lock, once the gate is galvanised or painted.
These easy to install Gatemaster bump stops are designed to reduce the noise of a gate banging shut. They are commonly used on pedestrian gates and are available in two sizes.
This screw fix keep plate is to be used with the Gatemaster GLB and GLB02 gate locking bolts. It is to be fixed to the second wooden gate so that the throw passes through the slot in the lock plate a...
The Gatemaster Gate Restrainer Safety Device is a simple but essential safety device to prevent the gate falling over should the top hinge fail. It is a tough design, with stainless steel wire rope a...
This GATEMASTER Superlock Keep is compatible with the full Gatemaster Superlock range. It is easy to fit - simply use the expanding fasteners to fix the keep to the gate post. This keep is versatile a...
The Gatemaster locking drop bolt is easy to fit and suitable for use on double gates. Once the dropbolt is in the ground the locking plate is rotated around the edge of the gate, so that when the sec...
This Gatemaster 5CDC stainless steel case is used in conjunction with the Gatemaster SBD Euro Cylinder Operated Deadlock, once welded in place it provides additional protection to the lock from both p...
This long throw gate bolt is an ideal choice for wooden or metal gates where key access is required from both sides, it is manufactured from stainless steel and the throw travels 53mm with a turn of t...
This Gatemaster euro operated double throw deadlock is designed to be welded into a fabrication. 2 turns of the key from either side will either shoot or retract the bolt with the bolt moving 24mm. ...
This Gatemaster spring gate closer is a helical door spring with pivoted arm suitable for gates up to 80kg. The closing speed is adjusted by inserting the supplied tension bar and increasing or decre...