A KFV normal action top shootbolt for use with multipoint locks with serrated drive rods.
The overall faceplate length is 235mm, the width is 16mm and the throw of the shootbolt is 22mm.
A shootbolt...
This is the key wind operation version of the KFV 2 pin multipoint lock for stable doors.
Backset: 35mm
Centres: 92mm
Operation: Key wind.
Latch reversal: Depending on date of manufacture either:
...
This single spindle Euro profile full locking mechanism from KFV features a 16mm faceplate, a latch & deadbolt gearbox and 2 round bolt locking points.
This KFV Key Wind multipoint door lock features 4 Rollers, 1 Deadbolt & 1 Latch.Identifying a KFV multipoint door lock is sometimes difficult. Early models did not feature a stamp on the faceplate but...
A 2 roller lock with serrations for attaching shootbolts at the top and bottom of the door.
Operation: Lift lever.
Latch reversal: Depending on date of manufacture either- Push in the latch and un...
A 2 shoot pin lock with serrations for attaching shootbolts at the top and bottom of the door.
Operation: Lift lever.
Latch reversal: Depending on date of manufacture either- Push in the latch and...
This KFV comes with 2 pin deadbolts and a central latch and deadbolt. Look out for older versions of this lock which have a slightly different case design and no markings on the faceplate. Some models...
This is the key wind operation version of the KFV 2 pin multipoint lock with 1490mm between the pins. Some models have been discontinued. Where available, alternatives are listed above although extra ...
A 2 hook lock with serrations for attaching shootbolts at the top and bottom of the door.
The screw centres either side of the spindle are 37mm.
Operation: Lift lever.
Latch reversal: Depending ...