KFV cases are riveted onto strips and need to be drilled and then re-riveted. These cases will only replace newer KFV locks as older versions have different connectors.
Operation: Lift lever
L...
KFV cases are riveted onto strips and need to be drilled and then re-riveted. These cases will only replace newer KFV locks as older versions have different connectors.
This Yale YS170 series genuine gearbox is only for the yale doormaster multipoint locks available in 35mm and 45mm backsets.
Operation: Lift lever split spindle
Latch reversal: Undo the screw or scr...
Fullex XL gearboxes are available in 35mm and 45mm backsets in single, double and split spindle configurations but their dimensions are all the same. They measure 227mm high by the backset + 15mm. The...
This Mila 4500 genuine slave gearbox has a single 8mm spindle with no latch and deadbolt
Also known as Coldseal and Swiftlocks
M4 x 10mm self-tapping machine screws need to be used with this ...
This Fullex Crimebeater genuine gearbox is available in 35mm, 45mm or a 55mm backset and 92mm/62mm centres.
Operation: Double spindle
Latch reversal: Undo the screw or screws (depending&nb...
This Winkhaus genuine gearbox - Split Spindle or Lever Lever. Winkhaus cases are held on to strips by pins. To remove the pins, tap them out with a punch (The centre pin must be accessed by undoing th...
This Safeware gearbox has an 8mm double spindle with 62mm/92mm centres and a 35mm backset.
Operation: Double spindle
Latch reversal: Undo the screw or screws (depending on the mo...